Melt elasticity behavior and extrudate characteristics of rigid poly(vinyl chloride)/epoxidized natural rubber miscible blends

Abstract

Abstract A study on the melt elasticity behavior and extrudate characteristics of melts of rigid poly(vinyl chloride), PVC, and rigid poly(vinyl chloride)/epoxidized natural rubber (ENR) miscible blends were conducted. Extrusion studies were carried out in a capillary rheometer and examinations of the surface characteristics of the extrudate were made by taking photomicrographs in a scanning electron microscope. The anomalous behavior in the die swell ratio of rigid PVC arising from the particle agglomerates continued in its blends up to 50 wt% composition of ENR. Temperature independence for high ENR blends was noted for the principal normal stress difference and elastic shear modulus, when shear stress was held constant. Recoverable shear strain and die swell ratio behaved identically in terms of blend composition and processing temperature. Factors which control the extrudate distortion and melt fracture of the melts of rigid PVC/ENR systems were fusion of particle agglomerates and strength of melts. Diamond cavitations were typical of the extrudate surface of PVC melts as those of the fracture surface of the tensile failure of PVC. Conditions to obtain a smooth extrudate surface of rigid PVC melts in blends with ENR have been found to be the low ENR content, low shear rate, or stress and high processing temperature.