Tear and processing behaviour of short sisal fibre reinforced styrene butadiene rubber composites

Abstract

Abstract The tear failure and processing characteristics of short sisal fibre reinforced styrene butadiene rubber (SBR) composites were investigated. Tear strength was examined with special reference to the effects of fibre length, fibre orientation, fibre concentration and bonding agent. It was observed that the tear strength depends on all the above factors. The tear failure mechanism was analysed from fractographs taken using a scanning electron microscope (SEM). During tear testing, the composites failed by a shearing process. Microscopic examination of cracks propagating in SBR composites revealed that the amorphous SBR matrix developed cracks, leaving ligaments of rubber attached to the broken fibres. The rubber particles were stretched as the crack opened and failure occurred at large critical extensions. It was observed that an increase in the concentration of fibres increased the tear strength in both longitudinal and transverse directions. The tear strength values were almost three to four times higher than those of the unfilled vulcanizates under similar conditions. In order to analyse the processing behaviour, the green strength, mill shrinkage and Mooney viscosity of the compounds were determined. Finally, the polymer–filler interaction was studied using the Lorenz–Park and Kraus equations.