Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater

Abstract

The possibility of application of low-cost and easily available materials such as cardboard or sawdust for the heavy metals removal from the acid mine water was investigated. The sawdust was obtained from oak and fir-wood. Those materials were tested on the real acid mine wastewater that contained copper, iron, zinc, nickel, and manganese in the concentrations above the maximal allowed level. The adsorption degrees of those elements were investigated. The results were shown that the iron was mechanically removed. The results of chemical analysis of effluent obtained by the use of sawdust from fir-wood indicate that the values for iron and nickel ions were lower than allowed values by the legislative direction. The highest value for copper adsorption degree of 98.31% was achieved at pH value of 7.94. Content of manganese in the effluent and at the end of process, was near the initial value. Using the sawdust obtained from oak as the adsorption material, zinc and manganese concentration in the effluent was near the start values and copper and iron content was decreased but the values were higher than allowed. Using the cardboard, the copper adsorption degree was up to 95 mass%, iron content was under the limit value for the applied chemical detection method. The content of the manganese was not changed and the content of the zinc was decreased but the concentration was over the maximum allowed value. [doi:10.2320/matertrans.M2011191]