Kinetics of Oxygen Exchange over CeO₂−ZrO₂Fluorite-Based Catalysts

Abstract

The kinetics of 18O/16O isotopic exchange over CeO2-ZrO2-La2O3 and Pt/CeO2-ZrO2 catalysts have been investigated under the conditions of dynamic adsorption-desorption equilibrium at atmospheric pressure and a temperature range of 650-850 degrees C. The rates of oxygen adsorption-desorption on Pt sites, support surface, oxygen transfer (spillover) from Pt to the support as well as the amount of oxygen accumulated in the oxide bulk, and oxygen diffusion coefficient were estimated. The nanocrystalline structure of lanthana-doped ceria-zirconia prepared via the Pechini route with a developed network of domain boundaries and specific defects guarantees a high oxygen mobility in the oxide bulk (D = (1.5 / 2.0).10-18 m2 s-1 at 650 degrees C) and allows accumulation of over-stoichiometric/excess oxygen. For Pt/CeO2-ZrO2, oxygen transfer from Pt to support (characteristic time < 10-2 s) was shown to be responsible for the fast exchange between the gas-phase oxygen and oxygen adsorbed on the mixed oxide surface. The rate of direct exchange between the gas phase and surface oxygen is increased as well due to the increased concentration (up to 2 monolayers) of surface/near subsurface oxygen species accumulated on the oxygen vacancies (originated from the incorporation of highly dispersed Pt atoms). The characteristic time of diffusion of the oxygen localized in the subsurface layers is about 1 s. The overall quantity of over-stoichiometric oxygen and/or hydroxyl groups accumulated in the bulk can reach the equivalent of 10 monolayers, and characteristic time of oxygen diffusion within the bulk is about 20 s. All these kinetic data are required for the further step of modeling partial oxidation of hydrocarbons under steady- and unsteady-state conditions.